Showing posts with label Hitachi StarBoard. Show all posts
Showing posts with label Hitachi StarBoard. Show all posts

Friday, October 5, 2012

Hitachi EZ Pen: No Batteries Required

Grant's Perspective on ... the Hitachi Link EZ2-Pen, review part 2.

A couple of weeks ago, I mentioned that Hitachi had released the Link EZ2-Pen that added interactivity to a regular projector. Our friendly Hitachi rep came by our Winnipeg location this week and dropped off our new Link EZ2-Pen system.

I really like the idea that the system only has the one piece digitizer unit and the pen. The digitizer quickly attached magnetically to our demo room whiteboard. The pen works as the mouse for the attached computer and allows for annotation.

The pen does not require batteries. This is great as it reduces the cost of ownership but more importantly it is hard to break the pen when compared to devices that have a battery because they contain other electronics that can be broken. The cost of replacing a pen that goes missing is much less than an electronic device going astray. The pen works as an infrared mirror that reflects back to the module. See the close up of the pen below. The reflective area is clearly visible.

digitizer and pen


close up of the pen
The system also comes with the StarBoard software so creating or sourcing great interactive lessons is a snap.

Give us a call if you want to try it out!

Grant

Friday, May 20, 2011

StarBoardLink Makes a Dry Erase Board Interactive

Grant's Perspective on ... the new interactive Hitachi StarBoardLink.

Hitachi has long been a part of the interactive market with their StarBoard series of interactive whiteboards. They have now brought the StarBoardLink to market.

The StarBoardLink is a good fit for the teacher that already has a projector and a smooth hard surface (standard whiteboard or wall) and would like to make their classes interactive, on a budget. This is the same technology as the Hitachi StarBoard but now without the board.

The StarBoardLink has an Infrared Image Sensor that is mounted at the top of the surface. The reflective bars are then mounted in a U shape around the Infrared Image Sensor.

The Infrared Sensor  is pre-drilled so that it can easily be permanently mounted at the top of your hard surface. With the sensor being mounted at the top of the surface it would be a good solution for rooms that have very low ceilings.

The interactive area is scalable. it can be set up with a 4:3 ratio ( 45" - 77") and the HD 16:10 ratio can be 45" - 90".

This adds another option for people that have been looking at interactive whiteboards or some of the other interactive systems such as the Hitachi iP-AW250N interactive projector and the Epson BrightLink and BrightLink Solo.

I have just read the StarBoardLink literature and look forward to getting my hands on the unit and putting it through some hands on testing.

Grant